Suburban Mfg 5286A
Water Heater; LP Gas; With Pilot And Direct Spark Ignition Options; On-Demand/ Tankless; 60,000 BTU; 12-1/2 Inch Height x 12-1/2 Inch Width x 20 Inch Depth; 36 Pounds When Installed; Non Portable; With Built-In Freeze Protection Mechanism; 2-Stage Modulating Combustion System Monitors (MCS); On Demand Control Center Or On/ Off Switch/ Wall Vent/ Water Heater Access Door Sold Separately
Type: LP Gas
Capacity: Without Tank
Ignition Type: Pilot Ignition Or Direct Spark Ignition
Wattage Rating: Not Applicable
BTU Level: 60000 BTU
Width: 12-1/2 Inch
Height: 12-1/2 Inch
Depth: 20 Inch
With Switch: No
With Access Door: No
With Indicator Light: No
With Mounting Hardware: No
Features
- Exclusive 60,000 BTU Two-Stage Self Modulating Combustion System
- Built-In Freeze Protection
- The Exclusive 2-Stage Modulating Combustion System (M.C.S) Monitors: Inlet Water Temperature And Water Flow, Output Water Temperature, Heat Exchanger And Burner Operation
- 2-Stage Modulating Combustion System (MCS) Which Instantaneously Adjusts The LP Gas Input To Provide Consistent And Endless Comfort Regardless Of Your Hot Water Needs
- Only 36 Pounds Installed
- Heated Water Attacks All Metals, But Not Porcelain
- Porcelain-Lined Steel Tank For Long Life
- Anode Rod To “Absorb” The Electrolytical Action
- Every Tank Is Pressure Tested Twice During The Manufacturing Process To Ensure Its Integrity
Before You Order
Check the available opening against the listed 12-1/2 by 12-1/2 by 20-inch dimensions and confirm LP gas and 60,000 BTU requirements; ignition descriptions conflict, and the control center, switch, wall vent and access door are sold separately.
Frequently Asked Questions
What fuel type and capacity are listed?
The source identifies LP gas and a 60,000 BTU rating.
What are the stated dimensions?
The source lists 12-1/2 inches high, 12-1/2 inches wide and 20 inches deep.
