Most hitches rely on outdated technology with bulky steel cams or friction sway controls that only react after sway begins. The Blue Ox SwayPro uses an advanced 4-point system with optimized geometry and tension to keep your trailer aligned and prevent sway before it starts. Its intelligently angled hitch head works with spring steel bars and secure latches to deliver superior stability.
Signature Rotating Latches
Featuring a handy latch tool for easy leverage, the rotating latches make chain hookup simple and secure. They prevent overload, allow backing up without removing the hitch, and eliminate noise during turns and reversals. The wrap-around chain design keeps chains quiet, and the low-profile brackets fit most A-frame accessories without interfering with battery boxes, LP tanks, or trailer frames. Bolt-on latches are available by special order if needed.
Spring Steel Bars for a Smooth Ride
Made from flexible spring steel, the SwayPro bars absorb bumps to smooth your ride, activate sway control, and optimize weight distribution and ground clearance. With no pins or clips to lose, these self-locking bars install easily by pushing into pivot heads.
No Head Angle Adjustments
Simply install the hitch head at the correct height—no washers, cams, or shims required.
Future-Proof Design
Upgrade your trailer, not your hitch. Just swap spring bars rated for your new trailer weight, while keeping all other components. This saves you money over time.
One Box, One System
Whether towing a camper or trailer, there’s a SwayPro designed to fit your needs.
Please note: This weight distribution kit is designed for trailers that have tongue weights that range from 750 lbs to 1,000 lbs and/or no more than 10,000 lbs of gross trailer weight.
• Spring bars require no grease, keeping your hands and clothes clean
• Open head design makes hitch ball access quick and easy
• The hitch head is pre-greased and pre-adjusted—no fine tuning needed
• Adjustable 10-inch shank fits 2-inch receivers
• Easy 15-20 minute installation
• Includes limited lifetime warranty
Specs:
Max Drop: 2 inch
Max Rise: 8 inch
Tongue Weight: 1,000 lbs.
Before You Order
Match the 750–1,000 lb tongue range and 10,000 lb maximum gross trailer weight to your trailer, and verify the 2-inch receiver and 7-hole shank adjustment for your setup.
Frequently Asked Questions
What trailer and tongue ratings are listed?
The description says the kit is for 750–1,000 lb tongue weight and no more than 10,000 lb gross trailer weight; specifications list 1,000 lb tongue weight.
What receiver size is listed?
The source describes an adjustable 10-inch shank that fits 2-inch receivers. Confirm receiver and trailer requirements.
