Victron Energy Blue Smart IP22 Charger, 12V / 30A 120V, NEMA 5-15

The Victron Energy Blue Smart IP22 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as classic cars, motorbikes, boats, and camper vans.

High Efficiency
With up to 94% efficiency, this charger generates up to four times less heat when compared to the industry standard. Once the battery is fully charged, power consumption reduces to 0.5 watt, five to ten times better than the industry standard.

Adaptive 6-Stage Charge Algorithm
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptivefeature will automatically optimize the charging process relative to the way the battery is being used.

Fully Programmable Charge Algorithm
Absorption, Float, and Storage voltages as well as the Recondition setting and the temperature compensation value can be programmed with the Bluetooth app. After enabling the Expert mode, the app allows changing practically all parameters and time limits used by the charge algorithm.

Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storagemode float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize the battery. This feature prevents stratification of the electrolyte and sulfation, which are major causes of early battery failure.

Specs
Input: 100-130V AC
Efficiency: 93%
Charge Current (normal mode): 30A
Charge Current (low): 15A
120V AC Connection: 6′ cable with NEMA 5-15 plug
Protection Category: IP22
Dimensions: 9.7″H x 4.3″W x 2.6″D