Dometic 8551202.400 WeatherPro Awning Hardware Standard Model
Dometic/A&E’s exclusive Knee Action Design
- Allows the awning to flex in moderate wind to prevent damage.
- Higher wind activates the automatic retraction system.
- The WeatherPro flexes to release accumulating water.
- Rugged metal weathershield is standard.
- Hardware configurations are available for most travel trailers, 5th wheels and motor homes.
- Hardware colors available: Polar White, Satin, Champagne, Black
NOTES:
- Power Awning Hardware Measuring Instructions:
- Measure from top of door to the awning rail, this distance will tell you if you have enough room to install a WeatherPro and Power Awning.
- These minimums needed to use STANDARD hardware
- Under 6″ – advisable not to use Weatherpro, end of door will scrap fabric
- Need 6″ to install WeatherPro with vinyl weathershield
- Need 7″ to install WeatherPro with metal weathershield
- NOTE: Add 2″ to the minimum needed if door is at or near center of awning.
- These minimums needed to use BASEMENT hardware:
- Need 11″ to install WeatherPro with vinyl weathershield
- Need 12″ to install WeatherPro with metal weathershield
- NOTE: Add 2″ to the minimum needed if door is at or near center of awning.
Before You Order
Measure from the top of the door to the awning rail and verify the applicable 6-inch or 7-inch minimum, adding 2 inches when the door is at or near center.
Frequently Asked Questions
What clearance is listed for standard hardware?
The listing says 6 inches for a vinyl weathershield and 7 inches for a metal weathershield; add 2 inches if the door is at or near the awning center.
What does the hardware do?
The description says the hardware can flex in moderate wind and release accumulating water; higher wind activates automatic retraction.
