Monoplex Fresh Water Pump Control Module (00-00145-100) by Intellitec®. Monoplex water pump controller is designed to operate as a “low side” remote switch in 12V DC systems. Whilst the water pump controller was designed to control the domestic water pump in an RV or boat application, its use however is not limited to this, it could also be used to control a wide variety of loads such as lighting, other pumps, fans etc when it is convenient to switch on the ground side. The Monoplex water pump control is packaged in a plastic enclosure for mounting near the water pump using two flat head screws. The water pump controller is capable of operating multiple switch points and up to two LED power indicators may be used all on the single wire. Power to the water pump controller can be supplied from either the battery or the converter.
Before You Order
Confirm your pump circuit uses a compatible 10 to 16V DC supply and that the 10A module rating fits the connected load before installation.
Frequently Asked Questions
What voltage range is listed for this module?
The specifications list a voltage rating from 10V to 16V.
